How to Set Your Practice's Rx Defaults

How to Set Your Practice's Rx Defaults

Learn how to set the default Rx selections that are filled in automatically when you invite patients. 

Rx Defaults are your practice's go-to retainer Rx selections. Once they're set, they'll be filled in automatically whenever you invite a patient, so you don't have to select them every time. You can update your defaults at any time, and you can still change them for an individual patient. Please read the instructions below.

HOW TO ACCESS RX DEFAULTS 

  1. From the left menu, select Account.
  2. Select Settings.
  3. Scroll down to the Rx Defaults section.

HOW TO SET YOUR RX DEFAULTS 

The Rx Defaults section has an Upper column and a Lower column. Both arches have the same dropdown options. Complete the following for each arch:

  1. Trim options: Select how the retainer should be trimmed:
    • Straight cut – 1mm gingival to CEJ
    • Scalloped – 0.5mm incisal edge to CEJ
    • Perio Scalloped – 2mm short everywhere
  2. Digitally Remove Bonded Retainer? Select Not applicable, Yes, or No.
  3. Digitally Remove Braces or Attachments? Select Not applicable, Yes, or No.
  4. Digitally add bite turbos? (UPPER arch only) Select Not applicable, 2-2, 3-3, or 3's Only.


HOW TO SAVE YOUR CHANGES

Click Save Changes at the bottom of the Rx Defaults section.


NotesNote: Each section on the Settings page has its own Save Changes button. Make sure you click the one inside the Rx Defaults section, or your defaults won't be saved.